CNC Machine Repair & Industrial Machine Repair in Minnesota
Good machine techs are hard to find. Ours cover the whole state. Minnesota Industrial MachineX handles CNC machine repair and industrial machine repair on site anywhere in Minnesota: CNC lathes and mills, press brakes, lasers, EDMs, punch presses, hydraulics, robots, PLCs and production lines, plus the parts, rebuilds and HACO machine sales behind them. Mechanical engineers back our techs, and for an emergency hard down we can usually respond the same day.
Minnesota techs traveling the whole state. Call and we’ll give you a real travel and arrival estimate, every time.
Industrial Machines We Repair
If it’s on your production floor and it’s broken, running rough or throwing alarms, call us. Here’s the equipment we work on and the problems that usually bring us out.
CNC lathes, mills and routers
We chase axis alarms, encoder and feedback faults, ballscrew backlash, turret indexing and chuck problems, ATC and pallet changer faults, and spindle noise or runout. That covers Haas, Mazak, Okuma, Doosan, DMG Mori, Makino, Hurco, Fadal and Mori Seiki machines on Fanuc, Siemens, Mitsubishi, Heidenhain and Fagor controls.
Press brakes
When angles won't repeat, Y1/Y2 sync faults show up or the X/R backgauge drifts, we trace it through the proportional valves, pump, light curtains and safety circuits. We work on Amada, Trumpf, Cincinnati, Accurpress, Bystronic, Salvagnini, HACO, Chicago (Dreis & Krump) and Ermaksan.
Laser cutters, plasma tables and waterjets
Dross and bad edges usually come down to nozzle centering, focus, assist gas or the chiller on a laser, torch height control on a plasma table, or the intensifier pump and high-pressure seals on a waterjet. We service fiber and CO2 lasers, plus Flow, Omax and Jet Edge waterjets.
Wire and sinker EDM
Threading failures, wire breaks, poor flushing, spent filters and resin, and power supply faults are the usual calls on Sodick, Mitsubishi, Makino, Fanuc RoboCut and AgieCharmilles machines.
Punch presses, shears and ironworkers
We handle turret indexing and alignment, clutch and brake trouble on stamping presses, shear blade gap, ironworkers, plate rolls and tube benders. Brands include Amada, Trumpf, Strippit, Murata Wiedemann, Minster, Bliss, Niagara, Verson, Scotchman, Piranha and Edwards.
Hydraulic systems
If pressure won't build, a ram creeps, a fitting leaks or a pump runs hot, we work through the relief and directional valves and cylinder seals, and we do full cylinder rebuilds.
Robots and automation cells
We fix servo and encoder alarms, lost positions after a collision, end-of-arm tooling and cell safety circuits on Fanuc, Motoman, ABB and Kuka robots.
Conveyors, packaging lines and plant equipment
We fix the drives, motors, sensors and photo eyes on the line, along with the Siemens, Modicon and AutomationDirect PLCs that run it.
We also repair injection molding machines (Cincinnati Milacron, Engel, Arburg, Van Dorn, Nissei, Toshiba), surface and cylindrical grinders (Okamoto, Chevalier, Brown & Sharpe, Harig) and band saws (DoAll, Hyd-Mech, Marvel). The full list is on our machine repair page.
Machine Rebuilds, Parts and Maintenance
If you can’t find or keep a maintenance tech, our monthly maintenance service fills that seat. Our Minnesota techs come to your plant on a set schedule, most plants monthly and busier floors every other week or weekly, to work the PM checklist and your repair list and keep your critical spares in order. So when something breaks between visits, you’re calling techs who already know your machines. Programs are quoted per plant after a walk-through.
Rebuilds and control retrofits
We rebuild spindles, hydraulic cylinders and full machines, and we put a new control on solid iron that's stuck with a control nobody supports anymore.
Servo motor repair and rebuilds
We test the motor, the amplifier and the feedback to find which one actually failed, handle the rebuild, then reinstall and tune it at the machine.
Machine alignment and leveling
We level machines, tram spindles, check axis squareness, set backlash compensation, align turrets and tailstocks, and bring press brake rams back to parallel.
Parts sourcing
Send a photo of the data plate and we'll identify obsolete and discontinued parts and track down a replacement. Parts are quoted before we order them, and we can stock critical spares at your plant.
Troubleshooting and engineering support
Call before we drive, because a lot of alarms can be sorted out by phone or video. Our mechanical engineers take the problems nobody else could figure out.
Preventive maintenance programs
We build PM schedules machine by machine, and that checklist is what our techs work through on every monthly visit.
Machine moves and installs
We handle rigging, relocation, setting, leveling and startup.
Industrial Machine Sales
We’re an authorized HACO dealer, so we sell new HACO press brakes, shears and fabrication machines and service them after the sale. We also sell refurbished machines and help you pick the machine that fits the parts you actually run.
How a Service Call Works
- Call (651) 386-6553 with the machine, the control and the alarm or symptom. If the machine is down, see emergency machine repair.
- We troubleshoot by phone or video when we can, and sometimes that’s the whole fix.
- If a tech needs to come out, we tell you who’s closest and give you a real travel and arrival estimate.
- The tech finds the cause on site, fixes what can be fixed that visit, and quotes any parts before ordering them.
- Before the tech leaves, you know what we found, what we fixed and anything that’s still open.
Where We Work
Our techs travel all of Minnesota. In the Twin Cities metro we’re usually an hour or less away, and for most plants in greater Minnesota travel runs two hours or less. We cover the metro, Central Minnesota and the Lakes Area, West Central, Southern Minnesota along I-90, the Southwest, Southeast and Bluff Country, the Arrowhead and Iron Range, and the Northwest. Every region and city is on our service area page.
Machine Repair Cost
On-site time and travel are billed by the hour, with travel billed one way only from wherever the nearest tech is. Parts are quoted before we order them, and the current numbers are on our rates page.
We're Hiring
We’re adding techs across Minnesota, so if you know CNC, hydraulics, PLCs or press brakes, take a look at our careers page.
Company Facts
| Fact | Detail |
|---|---|
| Company | Minnesota Industrial MachineX |
| What we do | On-site repair, rebuilds, retrofits, parts sourcing, alignment, preventive and monthly maintenance, and machine moves for CNC and industrial equipment |
| Equipment | CNC lathes, mills and routers; press brakes; lasers, plasma tables and waterjets; wire and sinker EDM; punch presses, shears and ironworkers; hydraulic systems; robots; injection molding machines; conveyors and plant equipment |
| Machine sales | Authorized HACO dealer; refurbished machines |
| Service area | All of Minnesota |
| Emergency service | Same-day response for hard-down machines in most cases |
| Rates | See our rates page |
| Phone | (651) 386-6553 |
| Address | [MN ADDRESS] |
FAQ
Do you cover all of Minnesota?
Yes. Our techs travel the whole state every day. In the Twin Cities metro we’re usually an hour or less away, and for most plants in greater Minnesota travel runs two hours or less. Call (651) 386-6553 and we’ll give you a real estimate on travel and arrival time based on where our techs are right now.
Our machine is down. Can someone come today?
For an emergency hard down we can usually respond the same day anywhere in Minnesota. Call (651) 386-6553 with the machine, the control and the alarm, and we’ll tell you when a tech can be there.
What does a service call cost?
On-site time and travel are both billed by the hour. Travel is billed one way only, figured from wherever the nearest tech is, and parts are quoted before we order them. Current rates are on our rates page.
What brands do you work on?
CNC machines from Haas, Mazak, Okuma, Doosan, DMG Mori, Makino, Hurco, Fadal and Mori Seiki; press brakes from Amada, Trumpf, Cincinnati, Accurpress, Bystronic and HACO; Fanuc, Siemens, Mitsubishi, Heidenhain and Fagor controls; and Fanuc, Motoman, ABB and Kuka robots, among others. If your brand isn’t listed, call anyway.
Can you find parts for an old or discontinued machine?
Often, yes. Send us a photo of the data plate and we’ll identify the part and look for a new, refurbished or rebuilt replacement. Parts are quoted before we order them.
Do you sell machines?
Yes. We’re an authorized HACO dealer, we sell refurbished machines, and we’ll help you figure out which machine fits the work you do.
Can you take over maintenance for our plant?
Yes. Our monthly maintenance program puts our techs in your plant on a set schedule for preventive maintenance, your repair list and critical spares, and it’s built for plants that can’t hire or keep a maintenance tech. Programs are quoted per plant after a walk-through.